RemovingSeatBeltUpperBolt.jpg (download)‎ (500 × 376 pixels, file size: 32 KB, MIME type: image/jpeg)

The process of removing the upper seat belt bolt and trim panel. After the cover is pulled off (1), the bolt can be removed with socket wrench and a 17mm socket (2). Be sure not to lose the spacer and washer (3). The trim panel is held on fast with two fir trees, one above and one below the seat belt bolt (4). The hole in trim shown in the lower-right image is where seat belt bolt passes through to the body. Photograph by Joe Angell.

Appears on these pages

  • Speakers:Rear

    Stock DeLoreans feature two 4" x 10" Craig speakers on the side walls behind the seats, below...

File history

Click on a date/time to view the file as it appeared at that time.

current04:04, January 25, 2010Thumbnail for version as of 04:04, January 25, 2010500 × 376 (32 KB)Angela (Talk | contribs)imported from the old wiki. Click on page history to view details of original uploader


Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.